AGGREGATE
GENERAL AND GEOMETRICAL PROPERTIES OF AGGREGATES
PRODUCT CATEGORY
Automatic Mortar Mixer
M2420 |
Automatic Mortar Mixer, 220-240 V 50/60 Hz |
M2420/110 |
Automatic Mortar Mixer, 110 V 60 Hz |
M2420/01 |
Spare Bowl for M2420 |
M2420/02 |
Spare Beater for M2420 |
ORIGIN: TÜRKİYE
Standards: ASTM C305 | EN 196-1 ,196-3,1015-2,413-2,459-2-EN 12687-35
M2420 |
Automatic Mortar Mixer, 220-240 V 50/60 Hz |
M2420/110 |
Automatic Mortar Mixer, 110 V 60 Hz |
M2420/01 |
Spare Bowl for M2420 |
M2420/02 |
Spare Beater for M2420 |
ORIGIN: TÜRKİYE
Standards: ASTM C305 | EN 196-1 ,196-3,1015-2,413-2,459-2-EN 12687-35
Automatic Mortar Mixer
The Automatic mortar mixer is designed to mix mortars and cement pastes to the requirements of EN 196-1, EN 196-3 and ASTM C305.
The mixing paddle has a planetary motion and is driven by a motor with a microprocessor based speed controller.
When the device automatic use option is selected; It mixes according to pre-programmed mixing programs in accordance with the cement and mortar preparation steps specified in international standards.
In the manual option, the machine can be used as a simple to operate, two-speed mixer.
Additionally, an automatic mixing program option where the user can define the time intervals for mixing has also been provided.
A safety switch is included to help set the mixing beater to the correct position to control the required clearance between the mixing blade and the bowl.
An automatic sand dispenser is attached to the side of the mixer and feeds the sand into the mixing bowl through an automatic command from the program controller, depending on the program selected.
A water dispenser assembly is also fitted to the side of the machine and allows the dispensing of pre-determined volumes of water for the requirements of EN 196 automatic.
The mixing paddle revolves at a rate of 140 and 285 (r.p.m. clockwise) with a planetary motion of 62 and 125(r.p.m. clockwise) in low speed.
Speeds (rpm) Paddle Mixing Head Shaft
Low (Manual Speed 1) 140 ± 5 62 ± 5
High (Manual Speed 2) 285 ± 10 125 ± 10
Automatic Mixing Mode
The auto mixing mode screen is shown as below.
The mixer is started with the "START" button. The process steps defined in the mixing method are executed for the specified time. Mixer stops automatically when all steps are completed. When desired, it can be stopped with the "STOP" button. With the "RESET" button, the operation steps are reset and the process is returned to the beginning.
Automatic mixing methods processing steps
Technical Specifications for Automatic Mortar Mixer
Product Code |
M2420 | |
|---|---|---|
Low Speeds (rpm) |
Paddle: 140 ± 5 | Mixing Head Shaft: 62 ± 5 |
High Speeds (rpm) |
Paddle: 285 ± 10 | Mixing Head Shaft: 125 ± 10 |
| Bowl Capacity | 5 Litres | |
| Motor Rating | 180 watts | |
| Automatic Program 1 | EN 196-1 | |
| Automatic Program 2 | EN 196-3 | |
| Automatic Program 3 | ASTM C305 | |
| Manual Program | For the user to determine the ratio of sand, water, cement and mixing time of the sample to be prepared. | |
| Dimensions | 400x580x650 mm | |
| Weight (Approx) | 56 kg | |
| Power | 220-240 VAC, 50/60 Hz | |