GRANULATS
PROPRIÉTÉS GÉNÉRALES ET GÉOMÉTRIQUES DES GRANULATS
CATÉGORIE DE PRODUIT
Slake Durabilité Appareil
|
TMA-1410 |
Slake Durability Apparatus, 220 V 50-60 Hz |
|
TMA-1410/110 |
Slake Durability Apparatus, 110 V 60 Hz |
|
TMA-1412 |
Pair of Mesh Drums |
ORIGINE: TURQUIE
Selon: ASTM D4644
|
TMA-1410 |
Slake Durability Apparatus, 220 V 50-60 Hz |
|
TMA-1410/110 |
Slake Durability Apparatus, 110 V 60 Hz |
|
TMA-1412 |
Pair of Mesh Drums |
ORIGINE: TURQUIE
Selon: ASTM D4644
Slake Durabilité Appareil
The Slake Durability Test Apparatus has been developed to assess the deterioration of rocks over a period of time when subjected to water immersion. The rock samples are dried and then submitted to wear stress inside a drum which is rotated into water. The test is performed different times and the wear is given by the loss in weight of the sample.
This Apparatus consists of a motorized drive unit which is mounted on a baseplate and which can rotate two or four drums at a speed of 20 r.p.m. The tank assemblies are filled with water to a level 20 mm below the drum axis. The test drums are manufactured from 2.00 mm mesh, 140 mm dia. X 100 mm long. A digital timer automatically stops the motor after the preset time. The equipment is supplied complete with two drums with tanks, and it can accept two additional drums.
This Apparatus consists of a motorized drive unit which is mounted on a baseplate and which can rotate two or four drums at a speed of 20 r.p.m. The tank assemblies are filled with water to a level 20 mm below the drum axis. The test drums are manufactured from 2.00 mm mesh, 140 mm dia. X 100 mm long. A digital timer automatically stops the motor after the preset time. The equipment is supplied complete with two drums with tanks, and it can accept two additional drums.
Spécifications Techniques des Slake Durabilité Appareil
Drum Mesh No |
2 mm |
|---|---|
Drum Dia |
140 mm |
Drum Height |
100 mm |
Dimensions |
1200x160x400 mm |
Weight (approx) |
18 kg |