En Welded Frame Low Capacity Automatic Compression Test Machines

The Testmak LS series low strength automatic compression testing machines have been manufactured for consistent testing of concrete cube and cylinder specimens.

These machines are produced to capacity range of 600 kN and 1500 kN. Suitable for CE security norms and EN 12390-3, 12390-4 | BS 1881 | ГОСТ 10180-2012 | NF P18-411 | BS 1610 | UNE 83304 | UNI 6686 Part 1 and 2 standards.

These compression test machines are controlled by the "TCM200" touch screen control unit.
Tests can be performed with TCM200 touch screen control unit or by either on TCM200 computer software. Can be done tests on computer with using TCM200 software and such as reporting, graphical output.

Low capacity automatic com­pression testing machines are supplied in Class 1 starting from 50 kN. Surface hardness 60HRC, flatness tolerance 0.02 mm. Traceable certificate of surface hardness available on request.

Testable Specimens
• Concrete Cubes: 100 mm, 150 mm, 200 mm concrete cube sample or any other custom cube and prism size can be tested with this machine.
• Concrete Cylinder: 100x200 mm, 150x300 mm, 160x320 mm concrete cylinder samples or any other custom diameters cylinder can be tested with this machine.

Can be done the following tests with this machines;
1- Compression strength tests.
2- Flexural and splitting tests by using proper accessories.
3- Mortar (Cement) compression tests by using proper accessories.
4- Core testing.

LS Automatic Compression Testing Machines supplied complete with following accessories;
1- Spacer Discs;
• Diameter 165 mm x Height 90 mm spacer disc 1 piece
• Diameter 165 mm x Height 50 mm spacer disc 1 piece
• Diameter 165 mm x Height 30 mm spacer disc 2 piece
2- Upper Platen;
• Upper Platen Diameter 165 mm (with ball seating assembly)
3- Lower Platen;
• Lower Platen Diameter 165 mm
4- Piston;
• Piston Diameter 160 mm (For 600 kN Capacity Models)
• Piston Diameter 200 mm (For 1500 kN Capacity Models)
5- Automatic Hydraulic Power Pack ;
• Automatic Hydraulic Power Pack, 410 bar (For All Models)
Safety Features
• Maximum pressure valves to avoid machine overloading
• Piston travel limit switch
• Emergency stop button
• Front and rear transparent durable plexiglas guards
• Software controlled maximum load value

LCD Data Acquisition Control System
The Data Acquisition Control provides real-time graphical indication. Automatically determines the load rate in accordance with the international standards upon sample type. With the STOP and START buttons, the test will automatically stop or start.

LCD Data Acquisition Control System has different units are available (kN / kgf / lbf). Can do Automatic Load Rate upon Sample Type. Total load and also per area are given. And has real time graph indication. Stops Automatically, when Test is completed. Test results can be send printer to with software or from the thermal printer. Can do calibration easily from 5 points. Manual Control is available. Computer and printer are not included in the price.

Software
The tests and calibration can be done and monitored with a computer by connecting it to the machine. LCD Control unit can connecting with USB port to the machine. Using the state-of-the-art software provided by TESTMAK with the machine will help performing and managing the tests in a very easy and fast way. By performing the tests via computer, the results can be saved and recalled when required. Reports can be generated automatically by the software and sent to printer.