Automatic Compression Testers For Concrete Cylinders And Blocks

The ASTM Automatic Compression Testers for Concrete Cylinders and Blocks are to test block specimens maximum 500x300 mm, cubes up to 300 mm side and cylinders up to diameter 160x320 mm. Exceeding of the ASTM E447, ASTM C39, ASTM C140 standard provisions (starts with the 10% of the machine capacity), the C5232 is supplied in Class A starting from 50 kN. This exceptional performance enables the machines to be used for a considerable number of applications including:

HSB Automatic Block Compression Testing Machines supplied complete with following accessories;
1- Upper Platen;
• Upper Platen 310x500x90 mm (with ball seating assembly)
2- Lower Platen;
• Lower Platen 310x500x90 mm
3- Piston;
• Piston Diameter 250 mm (For 2000 kN Capacity Models)
• Piston Diameter 300 mm (For 3000 kN Capacity Models)
4- Automatic Hydraulic Power Pack ;
• Automatic Hydraulic Power Pack, 410 bar (For 2000 kN Capacity Models)
• Automatic Hydraulic Power Pack, 700 bar (For 3000 kN Capacity Models)
5- Touch screen control panel and data acquisition unit
• 7 inch Touch screen control panel and data acquisition unit.
6- PC Software
• PC Software for Compression machine
7- Safety Doors ;
• Removable transparent front and rear safety doors

Testable Specimens
• Concrete Block: Maximum 400x300 mm.
• Concrete Cylinder: 100x200 mm, 150x300 mm, 160x320 mm concrete cylinder samples or any other custom diameters cylinder can be tested with this machine.

LCD Data Acquisition Control System
The Data Acquisition Control provides real-time graphical indication. Automatically determines the load rate in accordance with the international standards upon sample type. With the STOP and START buttons, the test will automatically stop or start.
LCD Data Acquisition Control System has different units are available (kN / kgf / lbf). Can do Automatic Load Rate upon Sample Type. Total load and also per area are given. and has real time graph indication. Stops Automatically, when Test is completed. Test results can be send printer to with software or from the thermal printer. Can do calibration easily from 5 points. Manual Control is available. Computer and printer are not included in the price.

Software
The tests and calibration can be done and monitored with a computer by connecting it to the machine. LCD Control unit can connecting with RS232 or USB port to the machine. Using the state-of-the-art software provided by TESTMAK with the machine will help performing and managing the tests in a very easy and fast way. By performing the tests via computer, the results can be saved and recalled when required. Reports can be generated automatically by the software and sent to printer.